iHello HFZ UNIVERSAL Bypass 8-8P iOS 15-16 [ Sim Working ]
ℹ️ How to Use the New HFZ iHello Bypass with Signal Tool
For New Users (Registered After Apple's New Patch or Registering Now):
-
Register Your Device: Start by registering your device on the server.
-
Connect to the HFZ iHello Tool: Once connected, the tool will check your device. Just wait patiently.
-
Jailbreak: Click the Jailbreak button and follow the tool's instructions to enter DFU Mode. Wait for the jailbreak process to complete.
-
Activate and Install Bypass: After jailbreaking, click the Activate button. The tool will install the bypass. Once done, you'll see a prompt: "Bypass installed! Now please, change the device Serial Number to: HW0523D2Z3A." Click OK, and your device will reboot automatically.
-
Change the Serial Number: Use the HFZ SN Writer Tool or any other tool to change the serial number.
- Important: For iPhone 6S / 6S+ / SE1, you'll need a DCSD cable. Other models can use a normal cable.
- Tip: Save your original serial number for future use.
-
Final Step - Bypass Complete: That's it! Your bypass is complete.
- Pro Tip: If you encounter a boot loop or your device gets stuck on the Apple logo after changing the serial number, connect your device to 3uTools in Recovery or DFU Mode. Use the 3uTools (Retain User's Data) option to update the device. This will unlock your device and take you directly to the home screen.
⏱ For Users Registered Early (Before the Patch):
-
Connect to HFZ: Just connect and wait for the tool to check your device.
-
Jailbreak: Click the Jailbreak button, enter DFU Mode, and complete the jailbreak process.
-
Activate and Finish Bypass: Click Activate and wait for the bypass to finish.
-
Bypass Complete: No need to change the serial number for these devices.
Note: If you see an error like "An error occurred while making an activation request, please contact support. ERR70/71/72/77," make sure not to insert a SIM card or have WiFi on during the bypass process.
Download : https://bit.ly/3xgFbrx
Twitter